Phone :+86-18122867790
TEl:+86-0755-27927879
E-mail:pm@vilva-test.com
vilva@vilva-test.com
URL: www.vilva.nethttps://vilva.en.alibaba.com
AC380V-50KW-R load bank
Product Category: Test Load Series
Product specifications: VILVA-AC380V-50KW-R load bank
Description: The VILVA-AC380V-50KW-R load bank is a device for detecting the output power and load capacity of generator sets, high-power UPS power supplies, inverters.
1. The product overview
VILVA-380V-50KW-R AC load bank has built-in pure resistive load; it can simulate various power loads and meet the needs of full load detection of AC power supply such as generator set, UPS power supply, inverter, etc. It is production workshop, laboratory and installation. Debugging, research and development necessary testing tools.
The host has a temperature overheating automatic alarm protection function: when there is overheating due to special reasons, the load can be automatically cut off. The whole machine is composed of a resistive load. The load works in energy-consuming mode, and the heat dissipation uses forced air cooling.
The fan adopts a small axial flow fan, which has the characteristics of large air volume, good heat dissipation and low noise. The above characteristics make the whole machine superior to imported products in terms of safety, reliability and noise reduction.
2, Technical parameters
Equipment technical parameters |
|
Rated voltage |
380V |
rated power |
50KW |
frequency |
50HZ |
Power factor |
PF=1.0 |
Load accuracy |
±5% |
Load control |
local manual open control |
Control switch |
local touch screen control |
Working power |
Can work continuously |
Protection level |
IP20(suitable for indoor use) single-phase AC220V 50HZ |
Fan noise |
65 decibel |
cooling method |
Forced air cooling |
Way of working |
Forced air cooling: side winds on the wind |
Protective function |
Forced uninstall/Over temperature protection/Over temperature alarm buzzer |
Mobile mode |
Prompt to install moving casters,easy movie |
weight |
800Kg |
Ring grave temperature |
-10 °C ~ +50 °C |
Relative humidity |
≤ 95% |
Altitude |
≤ 2500m |
3.Relevant standards and norms
(1) Safety of Power Sources, Reactors and Similar Products Part 1: General Requirements GB 19212.1-2008
(2) "Mechanical Safety Mechanical and Electrical Equipment Part 1: General Technical Conditions" GB 5226.1-2002
(3) "General rules for low-voltage switchgear and control equipment" GB/T 14048.1-2000
(4) "Marine diesel generator sets" GB/T 13032-2010
(5) General Specification for Loads of Military Internal Combustion Engines GJB 2815-97
(6) "General Specification for Military AC Mobile Loads" GJB 235A-97
(7) General technical conditions for industrial and intermediate frequency mobile loads GJB 235-87
(8) "General Test Method for Military Internal Combustion Engine Loads" GJB 1488-93
(9) "Design Standards for Industrial Enterprises" GBZ1—200
Shenzhen VILVA Electronic Technology Co. Ltd.
Business Address: 2nd Floor,Building A2,Songhu Zhigu R&D Center,Liaobu Town,Dongguan City, Guangdong Province, P.R.C
Factory Address: 2nd Floor,Building A2,Songhu Zhigu R&D Center,Liaobu Town,Dongguan City, Guangdong Province, P.R.C
Phone: +86-18122867790
Contact:Amy
Fax Number: 086 0755 29768581
Wechat ID:shenzhenvilva
WhatsApp:+86-15814356357
Skype:live:809b341254f5b3b8
E-mail: pm@vilva-test.com
3525878530@qq.com
Copyright@ Shenzhen Vilva Electronics Co., Ltd. Copyright 2013 www.vilva.net tel:0086-755-27927879 fax:0755-29768581 Contact:Amy +86-18122867790 E-mail:pm@vilva-test.com Add:2nd Floor,Building A2,Songhu Zhigu R&D Center,Liaobu Town,Dongguan City, Guangdong Province, P.R.C |